Danfoss VLT Soft Starter MCD 600 Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss VLT Soft Starter MCD 600. Danfoss VLT Soft Starter MCD 600 20 pagina's. Modbus rtu card
Ook voor Danfoss VLT Soft Starter MCD 600: Installatiehandleiding (2 pagina's), Installatiehandleiding (20 pagina's)
Pagina afdrukken
Installation Guide | DeviceNet Card
1 Safety
1.1 Disclaimer
The examples and diagrams in this manual are included solely for illustrative purposes. The information contained in this manual is
subject to change at any time and without prior notice. Responsibility or liability is never accepted for direct, indirect, or consequential
damage resulting from the use or application of this equipment.
1.2 Warnings
SHOCK HAZARD
Attaching or removing accessories while the soft starter is connected to mains voltage may cause personal injury.
Before attaching or removing accessories, isolate the soft starter from mains voltage.
-
RISK OF PERSONAL INJURY AND EQUIPMENT DAMAGE
Inserting foreign objects or touching the inside of the soft starter while the expansion port cover is open may endanger
personnel and can damage the soft starter.
Do not insert foreign objects in the soft starter with the port cover open.
-
Do not touch the inside of the soft starter with the port cover open.
-
1.3 Important User Information
Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without
warning.
The installer is responsible for following all instructions in this manual and for following correct electrical practice.
Use all internationally recognized standard practice for RS485 communication when installing and using this equipment.
4 | Danfoss A/S © 2018.10
W A R N I N G
W A R N I N G
AQ277154750780en-000102 / 175R1182
Safety