Danfoss VLT Soft Starter MCD 600 Installatiehandleiding - Pagina 7
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss VLT Soft Starter MCD 600. Danfoss VLT Soft Starter MCD 600 20 pagina's. Modbus rtu card
Ook voor Danfoss VLT Soft Starter MCD 600: Installatiehandleiding (20 pagina's), Installatiehandleiding (2 pagina's)
Pagina afdrukken
Modbus RTU Card
Installation Guide
3 Installation
3.1 Installing the Expansion Card
Procedure
1.
Push a small flat-bladed screwdriver into the slot in the center of the expansion port cover and ease the cover away from
the soft starter.
2.
Line up the card with the expansion port.
3.
Gently push the card along the guide rails until it clicks into the soft starter.
Example
1
Illustration 1: Installation of the Expansion Card
3.2 Connecting to the Network
The expansion card must be installed in the soft starter.
Procedure
1.
Restore control power.
2.
Connect field wiring via the 5-way connector plug.
Example
5
4
3
2
1
Illustration 2: 5-way Connector Plug
Pin
1, 2
3
4, 5
Danfoss A/S © 2022.11
2
Function
Data A
Common
Data B
Installation
AQ277154312778en-000201 / 175R1180 | 7