Danfoss iC7 Series Installatiehandleiding - Pagina 16

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss iC7 Series. Danfoss iC7 Series 18 pagina's. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Ook voor Danfoss iC7 Series: Installatiehandleiding (8 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (6 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (10 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (6 pagina's), Installatiehandleiding (6 pagina's), Installatiehandleiding (16 pagina's)

In-bottom/Out-back Cooling Kit for FA09-FA10

Installation Guide

Extend the duct upward and fasten with 6 M5 hex nuts, securing it to the duct support plate.

Illustration 13: Installation of the Bottom Duct

M5 hex nut

Bottom telescopic duct

M5x16 screw

2.11 Installing the Back Vent

To install the back vent, use the following steps. Refer to

Procedure

Slide 6 clip-on nuts over the edge of the vent opening in the backplate of the cabinet.

Base plate

Duct support plate

Lower flange of duct

Illustration

14.

AN371942757356en-000101 / 136R0252

Installation