Duncan 805 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Duncan 805. Duncan 805 8 pagina's.
Ook voor Duncan 805: Gebruikershandleiding (12 pagina's)
Pagina afdrukken
H O w i t w O r k S ( co nt.)
5
treble - Active +/-12dB of boost or cut at 2.12khz. From 12 o'clock, turn clockwise to boost
the highs, counter-clockwise to cut the treble available at your fingertips.
6
Status led - Indicates when the 805 Overdrive is active. LED is on when the unit is engaged,
off when in true bypass mode.
7
true Bypass footswitch - Removes the circuit from your guitar's signal via a hardwired
connection from the input jack to the output jack.
8
Output Jack - Run a cable to the input of your amp or to the next effect in your chain.
9
input Jack - Plug in your guitar or other pedal cable here.
Power Jack - We designed this pedal to be convenient. You can use any 9V to 18V regulated
10
DC adapter (negative polarity center terminal).
11
easy access Battery door (located on back panel) - When it is not in use, save your
battery life by removing your guitar cable from the input jack.
l e t ' S G e t S t a r t e d !
1. Start with the unit in bypass mode (LED off) and the Bass, Mid, Treble, and Drive at 12
o'clock and Level at lowest setting. Set your amp level appropriately.
2. Turn on the 805 Overdrive by pressing the footswitch – the LED will come on when it's
active.
3. Bring the Level control up to desired volume, then start experimenting with the gain
control. As you add gain to your signal, adjust EQ to desired tone.
4. Close eyes, smile, rock out in bliss.