CashTester CC 604 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CashTester CC 604. CashTester CC 604 5 pagina's. Coin counter
Ook voor CashTester CC 604: Gebruikershandleiding (13 pagina's)

CashTester CC 604 Gebruikershandleiding
To enter the batch setting mode press SET in the counting mode.
 Press PRINT/► to display the batch value of each denomination;
 Press + or – to increase or decrease the batch value by 1;
 Press and hold the + or – to adjust the value rapidly: when the value is more than 10, each adjustment
value is per 10 and when the value is more than 100, each adjustment value is per 100;
 Press CLEAR to clear the setting value: press and hold CLEAR for two seconds to clear the setting
value of all denomination;
 Press START/STOP to confirm and exit setting mode.
ATTENTION: when the batch value is set higher than the maximum quantity of container, the display will
show FULL. By pressing + you can switch between Y (accept) and N (deny and number will be set to 0)
and confirm the setting by pressing START/STOP.
When no batch quantity is set or when the batch function is turned off, the machine will stop at following
standard settings (maximum per container):
€ 0,01:
€ 0,02:
€ 0,05:
€ 0,10:
When the original containers are used, do not set the batch quantities higher than maximum as it
may result in damaging the CC 604.
2.3 Report mode
To get a report of the counted coins after the counting is finished, toggle between the values by
pressing REP multiple times (€ 0,01 ► € 0,02 ► ... ► € 2,00).
2.4 Date and time setting
In the counting mode, press SET 4 times to enter the date and time setting mode. The display will show
the setting in following order: YEAR, MONTH, DAY, TIME. Switching is possible by pressing PRINT/►. Press
+ or – to change the setting. After a change, confirm by pressing START/STOP. Press this button again to
leave this setting mode.
2.5 Printer setting
In the counting mode, press SET 3 times to enter the printer setting mode. By standard this is
set to model SP-POS58V which is the optional printer.

Maintenance and troubleshooting

4.1 Maintenance
In order to avoid miscounting errors, it is advised to clean the CC 604 regularly and at least once a week
as well internally as externally with a dry or moist cloth. Don't use any detergent and disconnect from
mains before cleaning the inside.
Also pay attention to the following:
if the temperature is lower than 20 degrees Celsius, please turn on the machine and wait for at
least 3 minutes before counting so that the CC 604 can acclimatize;
the CC 604 shall be operated at places with good ventilation and kept away from strong sunshine
and strong magnetic fields;
the power plug of the machine shall be inserted to a grounded electrical socket;
400 pieces
€ 0,20:
250 pieces
€ 0,50:
200 pieces
€ 1,00:
200 pieces
€ 2,00:
Cashtester CC 604
- 4 -
140 pieces
100 pieces
120 pieces
100 pieces