Danfoss VLT AutomationDrive FC 360 Installatie-instructies - Pagina 3
Blader online of download pdf Installatie-instructies voor {categorie_naam} Danfoss VLT AutomationDrive FC 360. Danfoss VLT AutomationDrive FC 360 4 pagina's. 90–315 kw, enclosure sizes j8–j9
Ook voor Danfoss VLT AutomationDrive FC 360: Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's), Bedieningshandleiding (2 pagina's)
Pagina afdrukken
Installation Instructions
Enclosure type J5
1.
Remove M4x50 screws in the bottom right and upper
left corners.
Illustration 1.6 Removing Fan Screws on Enclosure Type J5
2.
Grab the centre handle an pull the fan outwards.
3.
Unplug the fan cable
Illustration 1.7 Fan Cable Plug. Plug Location Depends on Fan
Type
Fan Replacement
1.1.4 Mounting
1.
2.
®
MI06F102 - VLT
is a registered Danfoss trademark
Connect the fan cable.
Mount the fan.
2a
Enclosure types J1, J2 and J4: Click the fan
into place.
2b
Enclosure types J3 and J5: Mount the fan
and fasten the screws.
3