CashTester BC 131 SD Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CashTester BC 131 SD. CashTester BC 131 SD 17 pagina's.

Maintenance and troubleshooting

3.1 Maintenance

In order to avoid miscounting/detecting errors, it is advised to clean the BC 131 SD regularly and at least

once a week. Dust on the detecting modules, IR sensor(s) and magnetic sensor(s) can affect the

counting result and therefore shall be cleaned thoroughly. You may clean the machine by using the

provided brush or optional cleaning cloth to remove any dust inside the machine.

Also pay attention to the following:

if the temperature is lower than 20 degrees Celsius, please turn on the machine and wait for at

least 3 minutes before counting so that the BC 131 SD can acclimatize;

the BC 131 SD shall be operated at places with good ventilation and kept away from strong

sunshine and strong magnetic fields;

the power plug of the machine shall be inserted to a grounded electrical socket;

assure that the different moving parts are not stained with grease, otherwise the banknotes will

slide and affect the counting.

ATTENTION: do not use any chemicals to clean this machine.

3.2 Software update

The BC 131 SD can be updated very easily by using a special micro SD card and we strongly

recommend this way of updating. This card can be obtained via your supplier and to provide the

correct software the serial number of the machine is needed.

Insert the micro SD card to the micro SD card reader at the backside of the machine. When the display

shows 'En1' press both buttons 'CUR' and 'MODE' simultaneously. Release both buttons when '-dn'

appears in the display and the BC 131 SD will start updating automatically. Only when the display shows

'donE' (which will take some time) the software is updated and you must manually turn off the counter.

ATTENTION: if the power is interrupted during updating or when the micro SD card drops out, please

insert the micro SD card again and the BC 131 SD will finish updating automatically.

Updating by USB/computer is also possible. In both cases contact your supplier for more information.

3.3 Removal of jammed banknotes

When a note is jammed inside the BC 131 SD, disconnect the power and open the top cover to remove

the banknote(s). Now close the cover and turn on the power again.

3.4 Adjusting the feeding gap

The feeding gap has already been set to the best position factory wise. Though, when one of the

following counting problems occur, it might be necessary to re-adjust the adjusting screw (see 1.4 Unit

design for the location):

lf frequently notes jam or are not counted smoothly, please turn the adjusting screw anti-clockwise

(-) to make the clearance larger;

lf frequently double notes or chained notes occur, please turn the adjusting screw clockwise (+)

to make the clearance smaller.

ATTENTION: only make minor adjustments to the adjusting screw!

Cashtester BC 131 SD

- 5 -