DUNE BD Prime Beknopte handleiding - Pagina 3

Blader online of download pdf Beknopte handleiding voor {categorie_naam} DUNE BD Prime. DUNE BD Prime 8 pagina's.

Safety measures:

To avoid troubles, before to start using this device, please read this quick guide carefully and

keep it for future reference.

Warning: This Blu-ray player uses a laser beam sightless with human eye. If directed

to human eye retina, it may cause hazardous radiation exposure and loss of sight.

Please make sure that you use the player in conformity with the user's manual. Please

make sure that the device is out of reach of small children as far as possible.

Caution: This product employs a laser system. Performing adjustments, or carrying

out procedures other than those specified herein may result in hazardous radiation

exposure. Do not open the safety enclosure: this product does not contain any parts

that can be repaired by the user.

1) Do not try to repair the device. Only authorized after-sales centers are entitled to carry out repair

and preventive maintenance.

2) To avoid electric shock, do not touch the plugged in device with wet hands and do not allow

moisture within the case. If it happened, immediately unplug the device and contact an authorized

Dune service center.

3) Clean the device only with a dry soft cotton, or alike, cloth preventing accumulation of static

discharges. Do not use any liquid detergent or scouring powder. In case of hard dirt, use special

wipes suitable for PC care. Make sure that the wipe is dry enough (otherwise fluid drops may get

inside).

4) The device is for indoor use only. Do not expose it to direct sunlight, do not leave it near a heater

or radiator.

5) DO NOT use the device in rooms with high humidity.

6) DO NOT plug in the player immediately after moving it from a cold into a warm place. If you move

the device from an extremely cold place, unpack it and leave for 1.5 to 2 hours in order to allow

evaporation of condensate on internal parts, afterwards you may start using it.

7) Please make sure to switch off all relevant AV equipment before connection to the Blu-ray media

player.

8) Use EU-standard screened cables and sockets.

9) Do not move the media player during the disc playback, since there is probability of damage of

optical drive and internal parts.

10) Do not place any items on the player. The device needs some space for releasing of heat produced

during its operation. DO NOT place any liquid-containing vessels, metallic items and any other

materials upon its top enclosure that may disturb the normal operation of the device.

11) Do not hinder the opening of the tray of the media player. If something hinders the tray opening,

remove it and try again.

12) Please remove the disc out of the player after viewing and turn off the player.

13) Do not press the disc tray. Do not place any items on the tray.

14) Voltage fluctuations in AC mains may result in improper operation of the device. In this case, please

turn off the player with the POWER button on the front panel of the device or unplug, and after 10 to

15 seconds plug in back. The media player will restart, and its functionality will be restored.

15) If you intend not to use the Blu-ray media player for a long period of time, for safety reasons and to

spare power, please make sure to unplug from the AC mains. Please be aware that even in standby

mode the device consumes the power.