Casio 2042 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Casio 2042. Casio 2042 3 pagina's.

Pagina afdrukken

Setting the Alarm Time

1. In the Alarm 1 or Alarm 2 Mode, hold down C C C C C until the hour digits start to flash on

the display.

• The hour digits flash because they are selected .

• This operation automatically turns on the Daily Alarm.

2. Press D D D D D to move the flashing in the sequence shown below to select other setting.

Hour

Minutes

3. While any setting is selected (flashing), press B B B B B to increase the setting or A A A A A to

decrease it.

• Select

HOME

for the City Code setting if you want the alarm to operate in accor-

dance with your Home City.

ensures that the alarm always sounds in accor-

HOME

dance with your home city time, even if you change to a different home city.

• You can also select a city code for the City Code setting. When you do, the alarm

sounds in accordance with the current time in that city.

• See the "CITY CODE TABLE" at the back of this manual for a complete list of

available codes.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. or p.m.

4. After the alarm time is the way you want it, press C C C C C to return to the initial Alarm

Mode screen (Alarm 1 or Alarm 2 Mode).

Daily Alarm Operation

The alarm sounds at the preset time each day for about 20 seconds, or until you stop

it by pressing any button. Note that the sound for Alarm 1 is different from that for

Alarm 2.

To test the alarm

In the Alarm 1 or Alarm 2 Mode, hold down B B B B B to sound the alarm.

Turning the Daily Alarm On and Off

1. Enter the mode for the alarm (Alarm 1 or Alarm 2 Mode) you want to turn on or off.

2. Press B B B B B to toggle on (alarm on indicator displayed) and off (alarm on indicator not

displayed).

• The AL1 indicator indicates that Alarm 1 is on, while AL2 indicates Alarm 2 is on.

• Alarm on indicators are displayed in all modes.

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed time,

split times, and two finishes. The range of the stop-

1/10 second

watch 23 hour, 59 minutes, 59 seconds.

• For the first 60 minutes, the screen shows minutes,

seconds, and 1/10 second ( AA'AA&A ). After 60

minutes, the screen format changes to show hours,

minutes, and seconds ( A:AA'AA ).

Minutes

Mode indicator

Seconds

(a) Elapsed time

B B B B B

Start

Stop

(b) Split time

B B B B B

C C C C C

Start

Split

B B B B B

C C C C C

Start

Split

First runner

finishes.

MEMO MODE

The Memo Mode lets you input up to 15 memos for

Memo text

instant recall when you need them.

• Memos are numbered from 1 to 15, and are stored

in sequential order starting from 1. There cannot be

a blank memo number between two memo numbers

that contain data.

• Any memo text longer than three characters auto-

matically scrolls from right to left on the display.

• The memo text on the display when you exit the

Memo Mode appears first the next time you enter

the Memo Mode.

Memo number

Mode indicator

Inputting New Memo Text

1. In the Memo Mode, use B B B B B to scroll through memos until

you find one that is blank (does not contain any text).

• If the message

that memory is full.

2. Hold down C C C C C until the flashing cursor appears on the

display.

3. Use A A A A A and B B B B B to scroll through the available letters,

numbers, and symbols in the following sequence.

Cursor

City Code

B B B B B

Re-start

Stop

C C C C C

B B B B B

Split release

Stop

B B B B B

C C C C C

Stop

Split release

Second runner

Record time

finishes.

of second

Record time of

runner.

first runner.

appears on the display, it means

FULL

(space)

4. When the character you want is at the cursor position, press D D D D D to move the cursor

to the right.

5. Repeat the steps 3 and 4 until your text is complete.

• You can input up to 32 characters for the memo text.

6. After inputting your data, press C C C C C to store it and return to the memo text screen

(without the cursor).

Recalling a Memo Text

In the Memo Mode, press B B B B B to scroll through stored memo text.

Editing Memo Text

1. In the Memo Mode, scroll through the memo text and display the one you want to edit.

2. Hold down C C C C C until the flashing cursor appears on the display.

3. Use D D D D D to move the cursor to the character you want to change.

4. Use A A A A A and B B B B B to change the character.

• For details on inputting characters, see "Inputting New Memo Text".

5. After making the changes, press C C C C C to store them and return to the memo text

screen (without the cursor).

Deleting Memo Text

1. In the Memo Mode, scroll through the memo text and display the one you want to

delete.

2. Hold down C C C C C until the flashing cursor appears on the display.

3. Hold down A A A A A and B B B B B at the same time until the message

the display to delete the text.

• After the text is deleted, the flashing cursor appears on the display.

4. Input memo text or press C C C C C to return to the memo text screen (without the cursor).

• Whenever you delete memo text, any memos following it are renumbered accord-

ingly. If you have memos numbered 1 through 5 and delete memo number 3, for

example, the remaining memos are renumbered so 4 becomes 3 and 5 becomes 4.

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and func-

tions of this watch.

Auto Return Feature

• After you perform an operation in any mode, pressing D D D D D returns to the Timekeep-

ing Mode.

• If you leave a screen with flashing digits or cursor on the display for two or three

minutes without performing any operation, the watch automatically saves anything

you have input up to that point and exits the setting screen.

Data and Setting Scrolling

The A A A A A and B B B B B buttons are used in various modes and screens to scroll through avail-

able settings on the display. In most cases, holding down these buttons scrolls at

high speed.

12-hour/24-hour Timekeeping Format

C C C C C

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also

Clear

applied in the World Time, Alarm 1, and Alarm 2 Modes.

• When 12-hour format is selected, the PM (Module 2041) or P (Module 2042) ap-

pears on the display to indicate "p.m." times and the AM (Module 2041) or A (Mod-

C C C C C

ule 2042) appears on the display to indicate "a.m." times.

Clear

• AM/PM indicators are not displayed when you are using 24-hour format.

C C C C C

Backlight Precautions

Clear

The backlight use an EL (electro-luminescent) panel that causes the entire display to

glow for easy reading in the dark. In any mode (except when making settings), press

A A A A A to illuminate the display.

• The backlight remains lit for about one second in the Timekeeping, Stopwatch, and

Memo Modes, and for about three seconds in other modes (World Time, Alarm 1,

and Alarm 2 Modes).

• The electro-luminescent panel loses illuminating power after very long use.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The portion of the display illuminated by the backlight depends on the watch model.

With some models, smaller indicators may not be made visible by backlight illumi-

nation.

• The watch will emit an audible sound whenever the display is illuminated. It does

not indicate malfunction of the watch.

• The backlight automatically turns off whenever an alarm sounds.

Timekeeping Mode Notes

• The day of the week is automatically displayed in accordance with the year, month,

and day settings.

• The year can be set in the range of 1995 to 2039.

• The watch's built-in full automatic calendar automatically make allowances for dif-

ferent months lengths and leap years. Once you set the date (year, month, day),

there should be no reason to change it except after the replacement of the watch's

battery.

• Standard Time/Daylight Saving Time settings for your Home City can be made in

the World Time Mode. See "WORLD TIME MODE" for details.

World Time Mode Notes

• The current time in all the World Time Mode cites is calculated in accordance with

the Greenwich Mean Time (GMT) differential for each city, based on the current

Home City time setting in the Timekeeping Mode.

• GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC) data.

• The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

Standard Time/Daylight Saving Time Auto Switching

The table below shows the cities that switch automatically between Standard Time

and Daylight Saving Time (DST). It also includes information about when the switch

is made.

• In the case of the

quence Midnight (12:59)

(DST), and 1:00AM (1:59)

(Standard Time).

Press B B B B B .

Press A A A A A .

REFERENCE

LON

(London) city code, for example, hours change in the se-

2:00AM

3:00AM on the applicable date in March

1:00AM

2:00AM on the applicable date in October

2041/2042-2

CLR

(clear) appears on