Casio 2184-1 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Casio 2184-1. Casio 2184-1 5 pagina's. Casio watch user manual
Pagina afdrukken
DATA BANK
The Data Bank Mode lets you store up to 30
Remaining memory
records, each containing name and
telephone number data. Records are
automatically sorted based on the characters
of the name. You can recall records by
scrolling through them on the display.
Name
• See "CHARACTER LIST" at the back of
this manual for details on how the watch
A
B
sorts records.
• If there is no data stored in the Data Bank
Mode, the message
C
D
following the remaining memory screen.
• Data Bank functions are available in the
Telephone number
Data Bank Mode, which you can enter
using C.
To create a new Data Bank record
1. In the Data Bank Mode, press B and D
Text area
at the same time to display the new data
Cursor
screen.
• The new data screen is the one that is
A
B
blank (contains no name and telephone
number).
• If the message
C
D
on the display, it means that memory is
full. To store another record, you will first
have to delete some of the records
Number area
stored in memory.
New Data Screen
2. Hold down A until the flashing cursor
appears in the text area of the display.
3. Use B and D to change the character at the cursor position in the
text area. The character changes in the following sequence.
Press D.
(space)
A
to
Z
:
4. When the character you want is at the cursor position, press C to
move the cursor to the right.
5. Repeat the steps 3 and 4 until your text is complete.
• You can input up to eight characters for the name.
6. After you input a name, use C to move the cursor to the number area.
• The text area can hold up to eight characters. When the cursor is
located at the eighth space of the text area, moving the cursor to
the right causes it to jump down to the first digit of the number area.
When the cursor is at the 14th digit of the number area, moving it to
the right (by pressing C) causes it to jump back to the first
character in the text area.
7. Use B and D to change the character (hyphen, number, or space)
at the cursor position in the number area. The character changes in
the following sequence.
Press D.
x
Press B.
8. When the character you want is at the cursor position, press C to
move the cursor to the right.
9. Repeat steps 7 and 8 until you complete number input.
• You can input up to 14 digits for the number.
10.After inputting your data, press A to store it.
• When you press A to store data, the message
the display for a while. After the sort operation is complete, the
cursor appears in the text area, ready for input a new Data Bank
record.
• Pressing A to store data after you input the 30th record causes the
message
to appear after the
FULL
the watch returns to the Data Bank record screen (without the
cursor).
11. Input more data (starting from step 3) or press A again to return to
the Data Bank record screen (without the cursor).
• The text area of the display can show only four characters at a time,
so longer text scrolls continuously from right to left .
To recall Data Bank records
In the Data Bank Mode, press D to scroll forward through records or B
to scroll in reverse.
To edit a Data Bank record
1. In the Data Bank Mode, scroll through the records and display the
one you want to edit.
2. Hold down A until the flashing cursor appears in the text area of the
display.
NO-DATA
appears
DATA
FULL
appears
Press B.
0
to
9
-
/
.
0
to
9
(space)
SORT
appears on
SORT
message. At this time,
3. Use C to move the flashing to the character you want to change.
4. Use B and D to change the character.
• For details on inputting characters, see "To create a new Data Bank
record" (step 3 for name input and 7 for number input).
5. After making the changes that you want, press A to store them and
return to the Data Bank record screen.
To delete a Data Bank record
1. In the Data Bank Mode, scroll through the records and display the
one you want to delete.
2. Hold down A until the flashing cursor appears in the text area of the
display.
3. Press B and D at the same time to delete the record.
• At this time the cursor appears in the text area, ready for input.
4. Input data or press A to return to the Data Bank record screen.
ALARM
You can set up to five independent alarms
Alarm date (Month – Day)
with hour, minutes, month, and day. When the
Alarm No.
alarm is turned on, the alarm tone sounds
when the time is reached. You can also turn
A
B
on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
• The alarm number (
C
D
indicates an alarm screen.
place of the alarm number when the Hourly
Time Signal screen is shown.
Alarm time
• Alarm settings (and Hourly Time Signal
(Hour : Minutes)
settings) are available in the Alarm Mode,
Alarm on indicator
which you can enter using C.
Alarm Types
The alarm type is determined by the settings you make, as described
below.
• Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes
the alarm to sound everyday at the time you set.
• Date alarm
Set the month, day, hour and minutes for the alarm time. This type of
setting causes the alarm to sound at the specific time, on the specific
date you set.
• 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting
causes the alarm to sound everyday at the time you set, only during the
month you set.
• Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound every month at the time you set, on the day you set.
To set an alarm time
1. In the Alarm Mode, press D to select the
A
B
alarm whose time you want to set.
C
D
2. After you select an alarm, hold down A until the hour digits of the
alarm time start to flash, which indicates the setting screen.
• This operation automatically turns on the alarm.
3. Press C to move the flashing in the sequence shown below to select
other settings.
Hour
Minutes
4. While a setting is flashing, use D (+) and B (–) to change it.
• To set an alarm that does not include a month (Daily alarm, Monthly
for the month. Press B or D until the
alarm), set
xx
appears (between 12 and 1) while month setting is flashing.
• To set an alarm that does not include a day (Daily alarm, 1-Month
for the day. Press B or D until the
alarm), set
xx
appears (between 31 and 1) while the day setting is flashing.
• When setting the alarm time using the 12-hour format, take care to
set the time correctly as a.m. (A indicator) or p.m. (P indicator).
5. Press A to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 20 seconds, or until you
stop it by pressing any button.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
AL-1
AL-5
though
SIG
appears in
AL-1
AL-2
AL-3
SIG
AL-5
AL-4
Month
Day
xx
mark
xx
mark
2184-2
)