Danfoss ECL Comfort 310 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss ECL Comfort 310. Danfoss ECL Comfort 310 7 pagina's. A302
Ook voor Danfoss ECL Comfort 310: Installatiehandleiding (8 pagina's), Montagehandleiding (4 pagina's), Gebruikershandleiding (12 pagina's), Gebruikershandleiding (12 pagina's), Installatiehandleiding (4 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (20 pagina's), Servicehandleiding (16 pagina's), Bedieningshandleiding (8 pagina's), Bedieningshandleiding (16 pagina's), Bedieningshandleiding (10 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (12 pagina's), Montagehandleiding (20 pagina's), Montagehandleiding (20 pagina's), Montagehandleiding (12 pagina's), Montagehandleiding (16 pagina's), Bedieningshandleiding (8 pagina's)

Installation Guide

2.0 Settings

To enable differentiated cut-out temperature based on the time of

the year two dates can be set with different settings of the cut-out

temperature as well as the filtering defining the accumulated

outdoor temperature.

For applications in which the heat cut-out has to run according

to the outdoor temperature only, the settings are to be set in the

"Summer cut-out" menu under "Optimization" for the heating

circuit in question.

This is valid as long as the dates for "Summer" and "Winter" in the

"Heat cut-out" menu are the same (factory setting).

Summer cut-out (limit for heating cut-out)

Circuit

1*)

*) depending on application

The heating can be switched OFF when the outdoor temperature is

higher than the set value. The valve closes and after the post-run

time, the heating circulation pump stops. 'Temp. min. ' will be

overruled.

The heating system switches ON again when the outdoor

temperature and the accumulated (filtered) outdoor temperature

become lower than the set limit.

DEN-SMT/DK

ECL Comfort 210 and 310, extended heat cut-out

11179

Factory setting

Setting range

OFF / 1 ... 50 °C

20 °C

Temp.

Actual outdoor temp.

18 °C

Heating ON

VI.GU.U1.02

Accumulated outdoor temp.

Heating OFF

Heating ON

Danfoss District Energy

Time