Danfoss FP975 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Danfoss FP975. Danfoss FP975 16 pagina's. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Ook voor Danfoss FP975: Installatiehandleiding (16 pagina's), Gebruiksaanwijzing (2 pagina's)
2.0 Advanced Settings
2.1 Temporary override buttons
Sometimes you may need to change the way you use your heating
temporarily, i.e. due to unusually cold weather. The FP975 has two
convenient overrides which can be selected without aff ecting the set
programme.
GB
+1HR
MAN
14
The grey buttons next to the radiator symbol are the
Heating override buttons.
The grey buttons next to the tap symbol are the Hot Water
override buttons.
Pressing this button when either system is in AUTO or
ALLDAY mode will cause the heating/hot water to remain
on for an extra hour. If it is pressed while the programme is
OFF the heating/hot water will come on immediately for 1
hour then go off again.
Pressing this button when either system is in AUTO or
ALLDAY mode will cause the heating/hot water to go OFF
until the next programmed ON, or vice versa.
FP975