Danfoss TP7000M Installatie-instructies Gebruikersinstructies - Pagina 5
Blader online of download pdf Installatie-instructies Gebruikersinstructies voor {categorie_naam} Danfoss TP7000M. Danfoss TP7000M 14 pagina's. Electronic programmable room thermostat
Ook voor Danfoss TP7000M: Handleiding voor installatie-instructies (9 pagina's)
Pagina afdrukken
- 1. Installation Instructions
- 2. Specification
- 3. Installation
- 4. DIL Switch Settings
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. Before You Start
- 8. Display Preferences
- 9. Setting the Clock & Day
- 10. Setting the OSC Period
- 11. Accepting the Preset Programmes
- 12. Before You Change the Preset Programmes
- 13. Programming in 7-Day Mode
- 14. To Convert to Thermostat Mode
- 15. To Programme Holiday Mode
- 16. User Overrides
7-day - each day can be programmed with different times and
temperatures.
5/2 day - one set of times & temperatures for weekdays, and
another set for weekends.
Optimum start control - function which switches the heating on
earlier than the Event 1 programmed time to ensure the required
temperature is achieved by the set time.
Chrono-proportional control - energy saving feature which
fi res the boiler at regular intervals to maintain a set temperature,
achieving a constant ambient environment for the user.
For a full explanation of all advanced features please visit
our website www.danfoss-randall.co.uk or call 01234 364621
to obtain a copy of our Advanced Features Guide.
Setting Optimum Start Control
J
Set Sw2 to OSC ON (see
DIL settings page 4)
J
Select OPTIMISER CURVE
in programming mode
A - Event 1 Set Point
B - Deviation from Set Point
C - Switch On Time prior to
Event
D - Optimiser Curve Setting
TP7000 Wiring (not RF models)
1
2
COM
OFF
ON
M models only
L
N
ELECTRONICS
3
4
5
6
REMOTE
SENSOR
'A' models
A
-1˚C
D
B
-2˚C
-3˚C
-4˚C
120
90
60
min.
min.
min.
C
7
only
30
Event 1
min.
time (0)
5