Danfoss APP 38/1 Servicehandleiding - Pagina 10

Blader online of download pdf Servicehandleiding voor {categorie_naam} Danfoss APP 38/1. Danfoss APP 38/1 20 pagina's. Disassembling and assembling

Disassembling and Assembling, APP 21-43

Service guide |

Disassembling and

assembling of the

swash plate

10 | 180R9121 | 521B1018 | DKCFN.PI.013.A6.02

WARNING:

Make sure that the surface on the swash

plate does not get any marks.

1. Place the swash plate upside down.

Remove the 2 bolts holding the swash

plate. Remove the mounting flange from

the swash plate.

3. Change the O-ring on the mounting

flange.

2. Check that the O-ring and pin are in good

condition (Provided with sealing set).

4. Mount the swash plate on the 2 pins.

Carefully by hand tilt the unit to

horizontal position and mount the 2 bolts

which hold the swash plate. Tighten the

bolts with a torqueaccording to exploded

view. Finally check the surface on the

swash plate for any marks or foreign

particles.

5. Mount the assembled part on the pump.