Danfoss PAHT G Series Servicehandleiding - Pagina 13
Blader online of download pdf Servicehandleiding voor {categorie_naam} Danfoss PAHT G Series. Danfoss PAHT G Series 20 pagina's. Paht and paht g 256-308 disassembling and assembling
Ook voor Danfoss PAHT G Series: Instructie (20 pagina's), Instructies voor demontage en montage (20 pagina's)
Pagina afdrukken
Instruction
Disassembling and assembling PAH 2-6.3, PAHT 2-6.3, PAHT C 2-6.3 and PAHT G 2-6.3
13. Place the screw in the center hole.
Alignment
hole
Guide pin
15. Mount the pump housing using the pin
as guide.
17. Tighten the screws to a torque of 13 Nm.
180R9094 / 521B0985 / DKCFN.PI.011.N5.02 / 09.2015
14. Tighten to a torque of 10 ±1 Nm.
16. Press the housing down by hand and
insert the screws.
18. Mount the two O-rings in the flange and
the O -ring on the front cover.
13