Danfoss PAHT Series Instructies voor demontage en montage - Pagina 10
Blader online of download pdf Instructies voor demontage en montage voor {categorie_naam} Danfoss PAHT Series. Danfoss PAHT Series 20 pagina's. Paht and paht g 256-308 disassembling and assembling
Ook voor Danfoss PAHT Series: Servicehandleiding (20 pagina's), Instructie (20 pagina's)
Pagina afdrukken
Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5
10
3. Mount the O-ring on the flange.
5. Mount the valve plate with seals on the
cylinder barrel.
7. Check that the gap between the cylinder
barrel and the valve plate is 1.5-2.5 mm.
180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017
Guide pin
4. Mount the port plate in its right position
using the pin as guide.
6. Press the valve plate into the cylinder
barrel using a piece of plastic.
8. Mount the cylinder barrel in the flange.