Dunlop Uni-Vibe UV-1SC Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Dunlop Uni-Vibe UV-1SC. Dunlop Uni-Vibe UV-1SC 2 pagina's.

FRONT PANEL CONTROLS:

Using the Dunlop UV-1SC Uni-vibe Stereo Chorus:

EFFECT/BYPASS SWITCH:

Selects between Effect and No Effect.The red LED will pulsate at the rate of

speed when the effect is on.

SPEED:

Controls the rate of the Chorus/Vibrato effect.The speed can be varied from

an almost imperceptibly slow speed to about eight times per second.

MIX:

Controls the amount of dry signal mixed into the "Right/Vibrato" output, and

the amount of effect mixed into the "Left/Chorus" output.

INTENSITY:

Adjusts how much the chorus/vibrato affects your signal.

Going easy with these controls and moving them a little at a time is probably

the best way to get a handle on their operation.

SIDE PANEL CONNECTORS:

P O S I T I V E T I P

INPUT JACK:

Connect a cable from your instrument or effects chain here.

POWER:

Connect the power supply here.The Dunlop UV-1SC is designed to be exter-

nally powered with the Dunlop ECB02 AC Adapter.This is a 9 volt regulated

adapter with a 3.5mm positive tip.

DUNLOP MANUFACTURING, INC.

P.O. BOX 846, BENICIA, CA 94510 U.S.A.

LEFT/CHORUS:

Connect a cable to the input of your amp, other effects, recording mixer or

other inputs here.When the "LEFT/CHORUS" output is used:The "MIX" con-

trol, when fully clockwise, is the MONO CHORUS mode, and fully counter

clockwise is dry.

RIGHT/VIBRATO:

Connect a cable to the input of your amp, other effects, recording mixer or

other inputs here.When the "RIGHT/VIBRATO" output is used:The "MIX" con-

trol, when fully clockwise, is the MONO CHORUS mode, and fully counter

clockwise is VIBRATO.Vibrato bends the pitch up and down, giving a cool, quiv-

ering texture to your sound.

When both outputs are used:The "MIX" control, when fully clockwise, is the

MONO CHORUS mode with a centered sound image, and fully counter clock-

wise, is the "WIDE" Stereo mode.