Danfoss 176F4046 Installatiehandleiding - Pagina 6
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss 176F4046. Danfoss 176F4046 16 pagina's. In-back/out-back cooling kit for fa09-fa10, frequency converters
Pagina afdrukkenIn-back/Out-back Cooling Kit for FA09-FA10
Installation Guide
74 (2.9)
8x Ø 6 (0.2)
2x Ø 8 (0.3)
Mounting Holes
29 (1.1)
4x Ø 7 (0.3)
Illustration 4: FA10 Mounting Plate Template for In-back/Out-back Cooling
2.4 Preparing the Backplate
To create vent openings in the cabinet backplate to match the openings in the mounting plate, use the following steps. Refer to
Illustration 5
for FA09 frequency converters and
Procedure
1.
Cut out the vent openings in the cabinet backplate using the dimensions in the FA09 or FA10 template.
The openings must match the mounting plate openings.
2.
Drill screw holes (6 mm) around the vent openings.
The FA09 requires 6 holes around each vent opening, and the FA10 requires 8 holes around each. The holes must align
with the holes in the outer flanges of the ducts.
6 | Danfoss A/S © 2022.03
321 (12.6)
280 (11.0)
271 (10.7)
16 (0.6)
295 (11.6)
328 (12.9)
Illustration 6
for FA10 frequency converters.
2x Ø 8 (0.3)
Mounting Holes
110 (4.3)
130 (5.1)
10 (0.4)
1051 (41.4)
896 (32.3)
140 (5.5) 180 (7.1)
AN371942471353en-000101 / 136R0248
Installation