Danfoss 176F4171 Installatiehandleiding - Pagina 3
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss 176F4171. Danfoss 176F4171 6 pagina's. Ground bar kit for fk09/fb09 and fk10/fb10, ic7 series frequency converters
Pagina afdrukken
Ground Bar Kit for FK09/FB09 and FK10/FB10
Installation Guide
2.2 Replacing the Side Brackets
Before installing the ground bar, use the following steps to replace the existing brackets with the brackets from the kit.
1.
Remove the existing side brackets by removing 2 screws (T25) from the cabinet exterior, 1 from the left bracket and 1 from
the right bracket. See
Illustration 1: Removal of Existing Side Brackets
2.
Attach the new left bracket by fastening 1 M5x12 screw (T25) through the side panel of the cabinet and into the bracket.
Repeat for the right bracket.
The left and right brackets differ from each other. See
Danfoss A/S © 2022.10
Illustration
1.
Illustration 2
for the positioning of each bracket.
Installation
AN422434236428en-000201 / 136R0288 | 3