Casio SHB-200 Bedieningshandleiding - Pagina 8
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Casio SHB-200. Casio SHB-200 15 pagina's.
Pagina afdrukken
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCH+.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (B) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(B) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to "C" when
●
a connection is established between
the watch and phone.
3.
Y Use CASIO WATCH+ to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch. When a connection is
established, the watch will adjust its time
setting to that of the phone.
If the watch is not paired with the phone you
●
want to connect with, perform the procedure
under "
C Pairing the watch with a
pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
"C", hold down the (B) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(B) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to "C" when
●
a connection is established between
the watch and phone.
Operation Guide 5459/5460
Important!
If you have problems establishing a
●
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone's home
screen, tap the "CASIO WATCH+"
icon. After the app starts up, hold
down the watch's (B) button for
about 1.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCH+: "Watch
settings" n "Set the time for
connecting to this app". Next, select
a setting of 3 minutes, 5 minutes, or
10 minutes.
While the watch is connected with
●
the phone, the second hand makes
one revolution with each passing
minute.
Disconnecting from a Phone
Pressing (B) terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
phone" to
After disconnection
30
30
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
adjustment may cause problems, you can
perform the procedure below to disable it.
Perform the same procedure again to re-
enable auto time adjustment.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (B) button for about 1.5
seconds.
The second hand will move to "C" when a
connection is established between the
watch and phone.
The second hand will move to "R". Keep
●
(B) depressed until the second hand
starts moving again and then stop at
"R".
3.
Y Tap in the following sequence:
j n "Watch settings".
4.
Y Tap "Time adjustment".
5.
Perform the operation shown on the
phone screen.
Unpairing
1.
X If the watch is connected with a phone,
press (B) to terminate the connection.
Connected
After disconnection
30
2.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
3.
Y Tap the CASIO WATCH+ j icon.
4.
Y In the "Previously registered watch" list,
tap the watch you want to unpair.
5.
Y Tap "Delete pairing registration".
6.
Y Tap "Delete".
This unpairs the watch from the phone.
30
8