Casio 2296-1 Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Casio 2296-1. Casio 2296-1 6 pagina's.

Module No. 2296

• Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can

be found in the "REFERENCE" section.

Keypad

• Press B to change from mode to mode.

• In any mode (except for the Stopwatch Mode), press D to illuminate the display.

Timekeeping Mode

Press B.

TIMEKEEPING

This watch automatically adjusts its time setting in accordance with the time

calibration signal (Call Sign: WWVB) transmitted from the National Institute of

Standard and Technology (NIST) in Fort Collins, Colorado. You can also perform a

manual procedure to set the time and date, when necessary.

Important!

• Before using the watch after purchasing it, use the procedure under "Selecting Your

Time Zone City Code" to specify your city code, and then use the procedure under

"To trigger a calibration signal receive operation manually".

• The Fort Collins time calibration signal includes both standard time and Daylight

Saving Time data. This means the watch can automatically adjusts for DST, even if

you do not specify it manually. See "Daylight Saving Time Setting" for more

information.

Setting the Time and Date

There are three different methods you can use to set the watch's time and date.

• Auto receive of the time calibration signal

• Manual receive of the time calibration signal

• Manual setting without using the time calibration signal

No matter which method you use, you must specify your time zone city code first (see

below).

Selecting Your Time Zone City Code

Use one of the procedures below to specify your current time zone. If you move to a

different time zone either inside or outside of the Continental United States, simply

change the time zone setting and the watch adjusts its current time and date settings

accordingly.

• To select a time zone within the Continental United States, use the procedure under

"To select your time zone city code".

• To select another time zone, use the procedure under "To select a time zone outside

the Continental United States".

Important!

• Make sure you set the correct time zone city code for the time zone where you are

located. The wrong time zone city will cause the watch to display the wrong time.

• The time zone city code (LAX, DEN, CHI, NYC, etc.) is not shown on the

Timekeeping screen. See "To view the current time zone city code".

To select your time zone city code

In the Timekeeping Mode, use the key operations shown in the table below to select

the indicated city code. Hold down this key until the watch beeps (about two seconds).

• Selecting a city code causes the year, month, day, hour, minutes, and DST settings

to change accordingly.

ABOUT THIS MANUAL

GENERAL GUIDE

Telememo Mode

Calculator Mode

Stopwatch Mode

Hold down this key

If you are here:

until the watch beeps

(about two seconds)

LOS ANGELES, SAN

FRANCISCO, LAS

VEGAS, SEATTLE

DENVER, EL PASO

CHICAGO, HOUSTON,

DALLAS/FORT WORTH,

NEW ORLEANS

NEW YORK, DETROIT,

MIAMI, BOSTON

To view the current time zone city code

1. In the Timekeeping Mode, hold down A until the

City code

current Auto Receive On/Off setting starts to flash,

which indicates the setting screen.

2. Press D twice to display the city code setting screen.

3. Press A to exit the setting screen.

• See the "CITY CODE TABLE" at the back of this

manual for information about time zone and

applicable cities.

To select a time zone outside the Continental United States

1. In the Timekeeping Mode, hold down A until the current Auto Receive On/Off

setting starts to flash, which indicates the setting screen.

2. Press D twice to display the city code setting screen.

3. Use

(REV) and

(FWD) to scroll through time zone city codes until the

one you want is displayed.

4. Press A to exit the setting screen.

Time Calibration Signal Reception

Removing the watch from your wrist and positioning it as shown in the illustrations

nearby helps to optimize signal reception.

Resin band

Note

• Place the watch on a stable surface so its top (12 o'clock side) is facing in the

general direction of Fort Collins, Colorado.

• See "Time Calibration Signal Reception Precautions" for important information about

time calibration signal reception.

2296-1

World Time Mode

Alarm Mode

To select

GMT time

this city

differential

code

LAX

–8h

DEN

–7h

CHI

–6h

NYC

–5h

Metal band