Dunster House ADAM III H4-2424ASH Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dunster House ADAM III H4-2424ASH. Dunster House ADAM III H4-2424ASH 15 pagina's. Shed-2.4m x 2.4m(8ft x 8ft)

Pagina afdrukken
STEP 8: HINGES
Items:
1x
PANEL - FB
3x
Hinge
18x 35mm SCREW
6x
Coach Bolt M6 x 60mm
6x
Washer M6
6x
Nut M6
Principle of hinges installation (1.0)
Front view to panels frame
with hinges
STEP 9: HASP & STAPLE, TURN BUTTONS
Items:
1x
Hasp & Staple
2x
Turn Button
9x
35mm SCREW
Principle of installation
Front view to panels frame
with hasp, staple and turn
buttons
Hasp & Staple - closed position
Assembly Steps
Pre-drill parts before fixing with screws
8a) Position the door in the frame ensuring there is a 5mm gap on each side of the door.
The bottom edge of the door should be flush with the bottom shiplap. See image below for
reference (1.0).
8b) Fix the hinges onto the door and wall panel. See image below for screw positions (1.1).
Ensure holes have been pre drilled.
Front view with fixings
Door
Flush
9a) Position the hasp, staple and turn buttons to correct position as shown in the diagram
below.
9b) Fix the hasp, staple and turn buttons into the frame by using 35mm screws.
Front view with fixings
Turn button
Bolt + Washer + Nut
Hinge
Gap approx. 5mm
35mm SCREW
Hinge assembly (1.1)
Hinge
35mm SCREW
Hinge
Pre-drill parts before fixing with screws
Staple
35mm SCREW
35mm SCREW
Bolt + Washer + Nut
Nut
Washer
Bolt
Turn button
35mm SCREW
Hasp
Page 11