Danfoss VLT AutomationDrive FC 302 Installatie-instructies - Pagina 3

Blader online of download pdf Installatie-instructies voor {categorie_naam} Danfoss VLT AutomationDrive FC 302. Danfoss VLT AutomationDrive FC 302 4 pagina's. Igbt module replacement for d1h–d8h drives
Ook voor Danfoss VLT AutomationDrive FC 302: Bedieningshandleiding (16 pagina's), Installatiehandleiding (20 pagina's), Handleiding voor installatie-instructies (6 pagina's), Handleiding voor installatie-instructies (12 pagina's), Installatiehandleiding (18 pagina's), Handleiding voor installatie-instructies (8 pagina's), Handleiding voor installatie-instructies (10 pagina's), Installatiehandleiding (6 pagina's), Installatiehandleiding (16 pagina's), Gebruiksaanwijzing (16 pagina's), Handleiding voor installatie-instructies (6 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (8 pagina's), Handleiding voor installatie-instructies (6 pagina's), Installatiehandleiding (6 pagina's)

Pagina afdrukken
Danfoss VLT AutomationDrive FC 302 Installatie-instructies
Installation Instructions
X2.1–X2.4 Motor Connectors M23 (in M25)
Female
General ratings
•
Pins 1, 2, 3, and 4: 480 V AC, maximum 15 A.
•
Pins C and D: 30 V DC, maximum 3 A.
•
Tightening torque: 1.5–2.0 Nm (13.3–17.7 in-lb).
Pin
Label
Connected to frequency
converter wiring schematic
1
U
3
V
4
W
2
PE
Table 4.3 Wire/Connector Assignment for Plug X2
Mating part: Motor X2 (male)
Phoenix ordering number: KCX-K0341/XX,XX
Maximum cable length: 7.0 m (23 ft)
2 Motor Connection Variant (134N3195)
To meet the protection rating, always keep blind plugs
installed.
Label
Connected to frequency converter wiring schematic
X2.1-B
53
X2.2-A
50
X2.1-A and
Connected to a common terminal
X2.2-B
X2.1-C and
Connected to an open terminal available in the
X2.2-C
frequency converter
X2.1-D and
Connected to an open terminal available in the
X2.2-D
frequency converter
Table 4.4 2 Motor Connection
4 Motor Connection Variant (134N3196)
Label
Connected to frequency converter wiring schematic
X2.1-B
53
X2.4-A
50
X2.1-A and
Connected via an internal terminal
X2.2-B
X2.2-A and
Connected via an internal terminal
X2.3-B
X2.3-A and
Connected via an internal terminal
X2.4-B
Table 4.5 4 Motor Connection
MI04G402
VLT® AutomationDrive FC 302 with Connectors
Minimum
2
wire [mm
(AWG)]
96 (U)
2.5 (14)
97 (V)
2.5 (14)
98 (W)
2.5 (14)
99 (PE)
2.5 (14)
Danfoss A/S © 11/2015 All rights reserved.
X51 PROFIBUS M12 Male, X52 PROFIBUS M12
Female
General ratings
•
30 V DC, maximum 1 A.
•
Tightening torque: 0.2–0.3 Nm (1.8–2.7 in-lb)
Label
Connected to frequency converter PROFIBUS
connector
1
5 V DC
2
–
3
0 V DC
4
–
Table 4.6 PROFIBUS Connection
Mating part: PROFIBUS X52 and X51 (female/male)
Phoenix ordering number: SAC-2P-MSB/ XX,XX-910/FSB SCO CT
X11–X14 I/O Connector Box (134N3195–
134N3196)
Phoenix sensor/actuator box - SACB-4/4-L-0,57HPUR CDA -
1531426.
Tightening torque sensor/actuator cable: 0.4 Nm (3.5 in-lb).
Label
Wire
Connected to frequency converter
X11-X14 1
Brown
X11-X14 2
X11-X14 3
Blue
X14-4
Gray
X13-4
Yellow
X12-4
Green
X11-4
White
Table 4.7 Connector Box (134N3195–134N3196)
X11–X14 I/O Connector Box (134N8410)
Phoenix sensor/actuator box - SACB-4/4-L-0,57HPUR CDA -
1531426.
Tightening torque sensor/actuator cable: 0.4 Nm (3.5 in-lb)
Label
Wire
Connected to wiring schematic
X11-X14 1
Connected to
Brown
frequency
X11-X14 2
converter wiring
X11-X14 3
Blue
schematic
X14-4
Gray
Connected to C-
X13-4
Yellow
option, MCO 305
X12-4
Green
wiring schematic
X11-4
White
Table 4.8 Connector Box (134N8410)
67
63
66
62
wiring schematic
12
+24 V Out
20
COM D IN
33
D IN
29
D IN/OUT
19
D IN
18
D IN
12
+24 V Out
20
COM D IN
X57-4
–
X57-3
–
X57-2
–
X57-1
–
3