Dunster House H4-1818ASH Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dunster House H4-1818ASH. Dunster House H4-1818ASH 15 pagina's. Adam i shed - 1.8m x 1.8m (6ft x 6ft)

Pagina afdrukken

STEP 6: PURLINS

Items:

ST-PT35701630 (Purlin)

12x 70mm SCREW

Principle of purlins

installation

Side purlins

Middle purlin

STEP 7: ROOF BOARDS

Items:

MFP - 1800x970x10

36x 35mm SCREW

Principle of floor boards installation

Use 35mm screws. Keep equal distance between screws. Make

sure that each screw is fixed into timber underneath the board.

Front view to inside

(Front panel have been removed for illustration

purposes only.)

35mm SCREW

MFP board

Assembly Steps

Pre-drill parts before fixing with screws

6a) Position the middle purlin as shown in the diagram and secure it by using 4x 70mm

screws (2x 70mm screws on each end of purlin).

6b) Position the remaining purlins in between the center purlin and the side walls. Use 2x

70mm screws per each purlin and secure them on the top and bottom. See image below

(1.0).

Flush

70mm SCREW

SIDE

7a) Position MFP onto the roof and ensure the overhang is equal for the front and rear.

7b) Secure the MFP to the purlins by using equally spaced 35mm screws. Use 18

screws per MFP board.

MFP board

Side view - Middle purlin connection

(1.0)

(Some components have been removed

for illustration purposes only.)

Middle purlin

Window

Pre-drill parts before fixing with screws

35mm SCREW

FRONT

70mm SCREW

MFP boards

Page 10