Abus TVAC15010C Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Abus TVAC15010C. Abus TVAC15010C 14 pagina's.

Icon explanation

A flash in the triangle is used if there is danger for the health, e.g. by an electric shock.

This triangular with the exclamation mark warning symbol indicates important notes in

the operating instructions which should be observed.

This symbol indicates special information bulletins and notes on the operation of the unit.

Important safety advice

All warranty claims are invalid in the event of damage caused by operating the system in

non-compliance with this user guide. ABUS USA LLC cannot be held liable for resulting

damages.

In the event of material or personal damage caused by improper operation or non-

compliance with the safety information, we cannot be held liable. All warranty claims are

voided in such cases.

The device has been manufactured in compliance with international safety standards. Please read these

safety advices carefully.

Safety advice

1. Mains supply

110 V AC voltage, 60 Hz (using a power supply unit for 5 V DC)

Operate this product only from the type of power supply indicated on the marking label. If you are not sure

of the type of power supplied to your home, consult your local power company. Disconnect the product

from the mains before you start any maintenance or installation procedures. The power supplies are only

for indoor usage.

2. Overloading

Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.

3. Liquids

Protect the device from any kind of liquids entering.

4. Cleaning

Disconnect the product from the wall outlet before cleaning. Use a light damp cloth (no solvents) to dust

the product.

5. Accessories

Do not use any unsupported accessories as these may be hazardous or cause damage the product.

6. Location

This device can be used in inside as well as outside.

The product will be damaged even it falls from a low height.

During the installation of the camera please take care that direct sunlight cannot fall onto the

image sensor of the device. Please follow the installation instructions in the corresponding

chapter of this user manual.

Do not place the device near a radiator or heat register.

Only operate the device at locations where temperatures within the permitted ambient

temperature range of 14 °F to 122 °F prevail. Outside the predetermined temperature range

operation is possible, but cannot be guaranteed.

English