Dunster House H4-GS3X3MK2PRG Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dunster House H4-GS3X3MK2PRG. Dunster House H4-GS3X3MK2PRG 13 pagina's. Utopia pergola 3m x 3m

Pagina afdrukken

1x - Glass

16x - Pin Nail

2x - Horizontal Beading Trim

2x - Vertical Beading Trim

Please Note: This diagram represents how to install one window panel frame. Please apply this procedure to all window

frames purchased.

Step 1: Place silicone around the edge of the frame.

Step 2: Place the GLASS into panel frame and make sure it is centralised.

Once Glass is in place apply silicone around the glass to secure it into place.

Step 3: Pre-drill the holes for the pin nails into the glass beading timbers.

Step 4: Fix beading ensuring it is parallel with their counterparts and secure using 40mm pin nails as shown in the image

below.

Principle of Glass Installation

**Quantity of components will vary, depending on your purchase

Silicone

40mm Pin Nail For Beading Trims

Please note:

Silicone

The glass is a smaller size compared to panel

frame to compensate for timbers contracting,

Silicone

swelling and glass not being cut square.

Silicone

Page 13