3Ware 9550SX Series Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3Ware 9550SX Series. 3Ware 9550SX Series 4 pagina's. Remote battery board
Ook voor 3Ware 9550SX Series: Gebruiksaanwijzing Addendum (1 pagina's)

Pagina afdrukken

Remote Battery Installation Guide

Insert the remote battery board in the chosen expansion slot and

secure the bracket with the screw you removed in step 2. (Note

that the remote battery board does not have a connector that

inserts into a slot on the motherboard).

Figure 3. Inserting the boards and connecting the battery power

to the BBU control module

10 Insert the battery power connector into the power receptacle on

the BBU control module, as shown above (Figure 3).

If you need a longer cable on the power connector, use the

extension cable to connect the battery to the power receptacle

on the BBU.

Note:

The battery will drain if it is plugged into the BBU and there

is no power to the unit. Wait to plug the battery into the BBU until

the system is ready for use.

3ware®, 3DM® are registered trademarks of AMCC. The 3ware logo, 3BM, StorSave are all

trademarks of AMCC. All other trademarks herein are property of their respective owners.

While every attempt is made to make this document as accurate as possible, AMCC assumes

no responsibility for errors or omissions in the document and shall not be responsible or

liable for any and all damages, claims and/or disputes that arise from dependence on this

publication.