AddLife ROPOX FlexiPlus Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AddLife ROPOX FlexiPlus. AddLife ROPOX FlexiPlus 17 pagina's.

Pagina afdrukken

Mounting instructions

When the double safety for FlexiPlus is being mounted, it's recommended to follow the wire diagram. Do
note, that it is not important which FlexiPlus frame is mounted with the primary or secondary box. Each frame
needs its own separate box.
a) Start with the primary box.
Insert the motor cable coming from the box in MOTOR, to the motor leg. It can be any leg.
It's recommended to use the outermost leg.
If the cable doesn't reach, use a motor cable that comes with FlexiPlus.
b) Insert the power supply in input POWER. Do not turn on the power yet.
c) Insert a motor cable in the control box, then in the input CONTROL.
d) Insert the safety strip cable in input SAFETY STRIP.
e) Insert the spiral cable (RJ45 cable) in IN 1.
IMPORTANT!
When connecting the safety boxes, the spiral cable must go from IN 1 in the first box to IN 2
in the second box.
f)
Take the secondary box, and repeat steps a), c), d) and e), except the spiral cable must go
in IN 2.
g) Glue the safety strip to the fascias, use the corner taps when it goes around a corner. Start
the farthest from the control box. Each frame must have its own safety strip.
h) Finish the safety strip 1cm from the edge, cut any remaining safety strip away, and mount
the end resistance in the safety strip.
1cm
i)
Take the safety strip cables already mounted in the boxes, and mount them in each safety
strip.
Notice!
The safety strip cable and end resistance can be tough to press into the safety strip. Try not
to bend the metal while connecting the cables!
TF 200.0055 / Rev 2
15