Casio fx-7400G PLUS Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Casio fx-7400G PLUS. Casio fx-7400G PLUS 13 pagina's. Chapter 9 - data communications
Ook voor Casio fx-7400G PLUS: Productcatalogus (16 pagina's), Gebruikershandleiding (13 pagina's), Specificaties (1 pagina's), Specificaties (1 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (15 pagina's), Bijlage (15 pagina's), Gebruik (2 pagina's)

2. Connecting the Unit with a

Personal Computer

To transfer data between the unit and a personal computer, you must connect them

through a separately available CASIO Interface Unit.

For details on operation, the types of computer that can be connected, and hardware

limitations, see the user's guide that comes with the Interface Unit.

Some types of data may not be able to be exchanged with a personal computer.

u u u u u To connect the unit with a personal computer

1. Check to make sure that the power of the unit and the personal computer is off.

2. Connect the personal computer to the Interface Unit.

3. Remove the cover from the connector of the unit.

• Be sure you keep the connector cover in a safe place so you can replace it after

you finish your data communications.

4. Connect the unit to the Interface Unit.

5. Turn on the power of the unit, followed by the personal computer.

• After you finish data communications, turn off power in the sequence: the unit

first, and then the personal computer. Finally, disconnect the equipment.

Data Communications

Chapter 9

165