Casio fx-9750G PLUS Programma-handleiding - Pagina 6

Blader online of download pdf Programma-handleiding voor {categorie_naam} Casio fx-9750G PLUS. Casio fx-9750G PLUS 18 pagina's. Graphing calculator
Ook voor Casio fx-9750G PLUS: Productcatalogus (16 pagina's), Communicatiehandleiding (13 pagina's), Lees deze eerste handleiding (13 pagina's), Functiehandboek (14 pagina's), Grafiek Handleiding (8 pagina's), Grafiek Handleiding (6 pagina's), Grafiek Handleiding (12 pagina's), Grafiek Handleiding (12 pagina's), Grafiek Handleiding (12 pagina's), Grafiek Handleiding (12 pagina's), Grafiek Handleiding (10 pagina's), Handleiding voor berekeningen (13 pagina's), Handleiding voor berekeningen (18 pagina's), Handleiding voor berekeningen (15 pagina's), Complexe getallen handleiding (6 pagina's), Handleiding voor berekeningen (6 pagina's), Handleiding voor berekeningen (20 pagina's), Gebruikershandleiding (13 pagina's)

Casio fx-9750G PLUS Programma-handleiding
Program for
Description
The mean (sample mean) and sample standard deviation can be used to obtain a
value.
(x – m)
t =
x
Example
To determine whether the population standard deviation for sample data 55, 54, 51,
55, 53, 53, 54, 52, is 53.
Perform a
Preparation and operation
• Store the program written on the next page.
• Execute the program as shown below.
Step Key operation
The above operation produces a t-test value of t(53) = 0.7533708035. According to the t-distribution
table in the next page, a level of significance of 5% and a degree of freedom of 7 (
produce a two-sided t-test value of approximately 2.365. Since the calculated t-test value is lower
than the table value, the hypothesis that population mean
416
PROGRAM SHEET
t
-Test Value
x
: mean of
σ
x
: sample standard deviation of
n
–1
n–
1
n
: number of data items
n
m
: hypothetical population standard deviation (normally
represented by µ , but
name limitations)
t
-test with a level of significance of 5%.
Display
x
data
x
m
is used here because of variable
Step Key operation
m
equals 53 is accepted.
No.
3
t
-test
data
Display
n
– 1 = 8 – 1 = 7)