Free The Tone ARC-4 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Free The Tone ARC-4. Free The Tone ARC-4 16 pagina's. Audio routing controller
Ook voor Free The Tone ARC-4: Procedures voor firmware-updates (18 pagina's)
Pagina afdrukken
SETLIST: PS3/L3 switch
Setting Setlists (ST-LS): ON/OFF switch 1
ST-LS
LIST1
ENTER
PARAMETER
Turn the PARAMETER encoder to select the desired setlist number (SET1–SET9).
Press the ENTER switch. The Display-2 shows the Setlist Edit screen.
Use the PARAMETER encoder to select the order (01–50) of the song you want to set and use the BANK /L8 or BANK /STORE switch to select the bank (001–200)
to be used.
Parameter 1: LIST1 to LIST9
Parameter 2: 01 to 50, 001 to 200
Copying Setlists (SL-CP): ON/OFF switch 2
BK-CP
FROM
ENTER
PARAMETER
Turn the PARAMETER encoder to select the copy source setlist.
Turn the PARAMETER encoder to select the copy destination setlist.
Parameter: LIST1 to LIST9 (default = LIST1)
NOTE
The desitination setlists will be overwritten.
Deleting Setlists (SL-DL): ON/OFF switch 3
SL-DL
ENTER
Turn the PARAMETER encoder to select the setlist to be deleted.
Parameter: LIST1 to LIST9 (default = LIST1)
Switching Setlist Contents (SL-SW): ON/OFF switch 4
SL-SW
LIST1
ENTER
PARAMETER
Turn the PARAMETER encoder to select the source setlist.
Turn the PARAMETER encoder to select the destination setlist.
Parameter: LIST1 to LIST9 (default = LIST1)
16
01- −−−
DONE
ENTER
ENTER
PARAMETER
BANK
/L8
BANK
/STORE
TO
DONE
ENTER
PARAMETER
ENTER
LIST1
DONE
PARAMETER
ENTER
AND
DONE
ENTER
PARAMETER
ENTER
MIDI: PS4/L4 switch
Detailed MIDI settings are done in these configuration modes.
Setting MIDI Receive Channels (RX-CH): ON/OFF switch 1
RX-CH
ENTER
Turn the PARAMETER encoder to select the MIDI receive channel. This sets the MIDI channel (CH1–16, OMNI, OFF) received by the ARC-4.
Parameter: OMNI, CH01 to CH16, OFF (default = OMNI)
NOTE
In OMNI mode, all of the MIDI channels 1–16 are received.
Setting MIDI Transmit Channels (TX-CH): ON/OFF switch 2
TX-CH
ENTER
Turn the PARAMETER encoder to select the desired MIDI transmit channel.
Parameter: CH01 to CH16, OFF (default = CH01)
NOTE
(CC-NM): This sets the MIDI channel used to send the MIDI control change number set by the ON/OFF switch 4.
Setting Expression Pedal's MIDI Transmit Channel (EP-CH): ON/OFF switch 3
EP-CH
ENTER
Turn the PARAMETER encoder to select the desired MIDI transmit channel.
Parameter: CH01 to CH16, OFF (default = CH01)
Setting MIDI Control Change Number to Each Function (CC-NM): ON/OFF switch 4
CC-NM
LOOP1
ENTER
PARAMETER
Turn the PARAMETER encoder to select the function to which you want to set the MIDI control change number.
Turn the PARAMETER encoder to set MIDI control change number.
Parameter 1: LOOP1 to LOOP8, MUTE, MODE, EXP PEDAL [EXPPDL], CTL1 to CTL4, INVERT, BOOST, MUTE-A, MUTE-B
Parameter 2: 000 to 120, OFF
Items Initially Set: LOOP1–LOOP8: OFF, EXP PEDAL [EXPPDL]: 112 , CTL1: 113, CTL2: 114, CTL3: 115, CTL4: 116, INVERT: 117, BOOST: 118, MUTE-A: 119,
MUTE-B: 120
NOTE
When receiving MIDI control change numbers: In both Direct and Preset modes, the assigned function is activated. (except for expression pedal)
When transmitting MIDI control change numbers: MIDI CC# assigned when in Direct mode is sent. Whether to send MIDI CC# assigned when in Preset mode or not is set by the (CC-
TX): ON/OFF switch 5. (If MIDI Tx is turned off by the (TX-CH): ON/OFF switch 2, then MIDI data is not sent even if each function is turned on.)
With this setting, an external MIDI controller can be used for detailed control of the ARC-4.
OMNI
RX-CH
PARAMETER
ENTER
CH01
TX-CH
PARAMETER
ENTER
CH01
EP-CH
PARAMETER
ENTER
OFF
LOOP1
ENTER
PARAMETER
ENTER
17