Abus TVCC71000 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Abus TVCC71000. Abus TVCC71000 16 pagina's. Vandal proof wd dnr day/night vario 650 tvl outdoor dome camera

Pagina afdrukken

For this camera type the camera module can be

removed, and it is fixed by two fixing screws. Base part

of the camera and camera module are connected by a

15 pin D-Sub joint. Unscrew the fixing screws, and

carefully remove the camera module.

Place the base part to the desired installation

position, mark the holes for fixing on the

surface, and drill the fixing holes. Use the

supplied screws and pegs to fix the base part on

the surface. The cable rounting can be done to

the side or throught the base.

Installation of the camera module

Bring the camera module close to the base

part so that the 15 pin socket and plug

position will match. At the opposite side of the

15 pin joint the module will be hold in position

by two fixing bars. In case socket and plug will

match please press the camera module on

both outside handles in direction of the base

part, until the 15 pin joint is fully latched.

Please screw the two fixing screws for the

camera module back.

Installation of the dome head

First please perfom the steps of adjustment of

viewing angle of the camera module as well

as the adjustment of the lens.

The dome head will be fixed on the dome

base by three screws. Please take care that

the dome head will placed even to the dome

base. The dome head ring will be fixed by

clockwise rotation to the dome head.