AudioCodes Mediant 800Ci uCPE Handleiding voor snelle installatie - Pagina 9
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} AudioCodes Mediant 800Ci uCPE. AudioCodes Mediant 800Ci uCPE 12 pagina's.
Pagina afdrukken
Configuring WAN Interface
This section describes how to configure the WAN interface, which uses Gigabit Ethernet.
Before configuring the WAN interface, make sure that you have all the required information from your Internet
service provider.
1.
Connect the WAN port to the WAN network. For information on cabling the WAN port, refer to the
Hardware Installation Manual.
2.
Open the WAN Interface page (Setup menu > IP NETWORK tab > CORE ENTITIES folder > WAN
Interface).
3.
Configure the following:
▪
WAN settings (Static or DHCP Client - default is DHCP Client)
▪
DNS settings (Static or Auto - default is Auto)
9 |
P a g e