AudioCodes Mediant 3100 Handleiding voor snelle installatie - Pagina 6
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} AudioCodes Mediant 3100. AudioCodes Mediant 3100 10 pagina's. Sbc and gateway
Pagina afdrukken
Powering the Device
The device can be powered from a standard alternating current (AC) electrical wall outlet or a DC power
source.
1. GROUNDING:
Ground (earth) the device by crimping an electrically earthed strap of 8-AWG (minimum)
wire into the grounding lug (supplied), and then attaching the grounding lug to the chassis, as shown in
the following figure, making sure that the spring washer is located between the screw head and the
lug. Connect the other end of the grounding wire to the building's protective earth (in accordance with
regulations enforced in the country of installation).
2. AC POWER:
For each Power Supply module, connect the line socket of the AC power cord (supplied) to
the device's AC power inlet, located on the rear panel. Connect the plug at the other end of the AC
power cord to a standard electrical wall outlet.
6 |
P a g e