FREEDEO TURBO SCREEN FD-T05F Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} FREEDEO TURBO SCREEN FD-T05F. FREEDEO TURBO SCREEN FD-T05F 10 pagina's. Passive 3d cinema system
Pagina afdrukken
8. System Positioning
8.1 Set the initial position of optical unit:
power on optical unit and the digital projector to play 3D movie, the
optical unit will move automatically to the side which close to the lens of
digital projector; Fine adjust optical unit position to align light incident
window right in front of digital projector lens, as shown in Figure 8-1.
Turn on the system to make
1
projector to play 3D movie
Keep a space
of 5mm
Make the projector to play 2D movie,
3
check if the optical unit is out of
projector optical light path
The optical unit position
for play 3D movie
Figure 8.1 Set the initial position of optical unit
11/15
Projector Lens
Optical Unit
Adjust the motorized bracket position
2
to align light incident window right in
front of digital projector lens
The optical unit position
for play 2D movie
8.2 Height and angle fine adjustment:
Turn on the digital projector and load cross calibration pattern from the
projector, briefly adjust position of up and down, left and right, center the
position of the pattern on the light exit window, as shown in Figure 8-2.
Height Range：50mm
Rotate screw to
1
adjust the height
of lifting gear
Figure 8-2 Adjust the Height and Angle of Lifting Gear
Angle Range：30°
Loosen screw to
2
adjust the angle
of lifting gear
12/15