AudioControl ACX-3.2 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AudioControl ACX-3.2. AudioControl ACX-3.2 20 pagina's. All-weather equalizer & crossover with paging mic

Pagina afdrukken

Installing the ACX-3.2 (continued)

Adjusting the Equalizer

Stereo Bands – There are no specific guidelines as to setting the main

equalizer controls on the ACX-3.2. Keep in mind that music can sound

different depending upon who is listening and what type of music they

are listening to. For some mid-bass kick, give the 125 Hz knob a whirl. On

the other hand if your front and rear speakers are having trouble keeping

up with your subwoofer then crank 125 Hz down a notch. If the vocals

need some boosting or even toning down, us the 1.25 kHz controls. The

frosting on any recording is always the higher frequencies. The 10 kHz

control lets you provide just enough frosting or you can cut back so you

don't get any cavities.

ParaBASS® Controls – The ParaBASS system control works with any system

that can reproduce bass in the 40 Hz to 80 Hz range. The bass response in

a system is affected by four factors: (1) the acoustics of the vehicle, (2) the

location of the speakers, (3) the music source you are listening to, and (4)

the speakers used. Because of the variations in the recording process, we

developed The Epicenter® to help restore any low frequencies lost during

the recording process. However, the acoustics of various environments

are different. With this in mind our coffee-laden engineers developed

the unique ParaBASS system. The Sweep control allows you to select a

center frequency (the frequency most affected) between 40 Hz and 80 Hz.

The Gain control then allows you to boost or cut (±10 dB) at the selected

frequency.

ParaBASS

Controls

Stereo EQ Bands

Owner's Enjoyment Manual