AudioControl LC7 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} AudioControl LC7. AudioControl LC7 16 pagina's.

¬ ②

LC7 Top View

Figure 2:

4. +12 Volt: Connect to a good source of power (the battery comes to

mind again)

5. Remote In: Allows your LC7 to be turned on remotely with a

12-volt signal. NOTE: If you are using the GTO signal sense on your

speaker level inputs, you will probably not need to connect this input.

6. Remote Out: Outputs 12 volts when the LC7 is powered up so you

can turn on external devices like signal processors and external amplifi-

ers. DO NOT USE FOR SYSTEM POWER!!

7. Maximized Indicator: This brightly colored LED indicates when

your signal level is just below clipping your LC7. When properly level

matched, this LED should flicker occasionally when your system is play-

ing at its maximum volume level.

8. Power: If you have connected all of your power wires correctly, this

light should be bright red when your system turns on.

9. Subwoofer Level Control / Source Selector: This input allows you

to add a remote that will allow you to control the subwoofer output of

your LC7 from your dashboard and select source inputs.

page

² ³