audiodinamica SUT 3 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} audiodinamica SUT 3. audiodinamica SUT 3 12 pagina's. Moving coil step up transformer

Pagina afdrukken
Three different impedance settings (L, M, H) are available for cartridge loading (per single
gain), which can be changed through the load selector. There isn't a universal rule, the
perfect matching load depends on your specific components and it is possible to use our
SUT n°3 with cartridges that have greater or lower internal impedances, or values that are
outside the suggested ranges as per the following table. However, it is important to realize
that input impedance from three to four times the internal impedance of your cartridge
will usually provide the best results.
Phono amplifier
input impedance
47k
47k
100k
100k
PAY ATTENTION!! Due to the high gain of the phono stage it is recommended to mute the
amplifiers and speakers before switching load or gain in the SUT to avoid the risk of
bumps.
As final recommendation, we suggest to trust your ears for a perfect matching load
between SUT n°3,your cartridge and the associated phonostage. Experimentation and
listening sessions are always a good guidance to find your preferred tonal balance.

4. MAINTENANCE

• Dust the unit surface with a clean, dry cloth.
• Keep the connectors clean to obtain the best performance. Using alcohol as a cleaning
solvent is acceptable.
This document and the information it contains are the property of IIA srl. It can not be reproduced or
modified by third parties without IIA's written approval.
Gain of the SUT
n°3
12x
24x
12x
24x
www.audiodinamica.com
Page 7 of 11
L
M
120
240
30
60
150
390
40
100
H
330
80
700
170