AudioEngine D1 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} AudioEngine D1. AudioEngine D1 8 pagina's. Premium 24-bit dac

Troubleshooting

• I have connected my D1 as shown in the manual, but there is no

music output.

1. Check to see that the power light is lit. If not, try another USB

output on your computer.

2. Ensure that D1 is selected as your output device under Control

Panel (PC) or System Preferences/Audio (Mac).

3. Try another USB cable.

• I have connected my D1 to my TV/DVD/BluRay, but there is no sound

output.

1. Be sure that D1 is also connected to a USB power adapter, and

that the power light is lit.

2. Be sure that your TV/DVD/BluRay digital audio is set to "PCM

Stereo".

• Only one channel plays through my D1.

1. Check the RCA cables between your D1 and your sound system.

2. Check your audio player to ensure that the balance is centered.

Break-In Period

Your DAC will sound great out of the box and will get better over time.

However, give it 40 to 50 hours break-in time before doing any critical

listening.

D1 setup guide

Electrical

Full Scale output

Frequency Response

S/N Ratio (DC to 20 kHz)

THD+N (1 kHz FS 96 kS/s)

Interface

Input Data Rate

Input Bit Depth

USB

Power Requirements

For additional specifications go to:

2.0V RMS

10 Hz - 25 kHz, +/- 0.5db

>110 dB

<0.0025%

up to 192KS/s

up to 24 bits

type 1.1 or above

130 mA

audioengineusa.com