AEV ProCal SNAP Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEV ProCal SNAP. AEV ProCal SNAP 9 pagina's. | jl wrangler & gladiator
Ook voor AEV ProCal SNAP: Gebruikershandleiding (9 pagina's), Gebruikershandleiding (16 pagina's)
Pagina afdrukken
ADDITIONAL FUNCTIONS
To use ProCal SNAP to clear DTC codes or restore your
vehicle's factory settings, follow programming steps 1 and 2
then PRESS/PULL and the combinations below and HOLD for
3 SECONDS.
CLEAR DTC CODES
+
BRAKE PEDAL
PULL HIGH BEAM
RESTORE FACTORY SETTINGS
+
BRAKE PEDAL
PULL HIGH BEAM
+
RES
+
CRUISE ON/OFF
VIEW SETTINGS
To view the current settings in your vehicle on the Instrument
Cluster Display:
•
Insert the ProCal SNAP into the OBDII port
•
Use the Cluster Display Control Buttons (arrow buttons)
to navigate to the AUDIO setting on the Instrument
Cluster Display.
•
Depending on the vehicle and radio combination, either:
turn the radio off or set the radio to AM
The Instrument Cluster Display will cycle through showing the
current settings in your vehicle. These include Tire Size, Axle
Ratio, Tire Pressure Threshold (Front and Rear), and the Procal
SNAP part number.
SET +
CANC
RES
SET -
SET +
CANC
RES
SET -