Audiolab 6000 Series Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Audiolab 6000 Series. Audiolab 6000 Series 17 pagina's.
Pagina afdrukken
Important Safety
Getting Started Controls and Connectors Remote Handset
Information
5: Connections
Analogue Inputs (Line Level)
Connect your analogue sources to one of the three line level
inputs, AUX1, AUX2 or AUX3.
Phono Input (MM)
Connect your Turntable (Moving Magnet cartridge) to the PHONO
Input. Connect the Earth lead from your Turntable (if available) to
the GROUND terminal.
Coaxial digital Inputs
Connect your coaxial digital sources to either DIG1 or DIG2.
Optical digital Inputs
Connect your Optical digital sources to either OPT1 or OPT2.
Pre-Amplifier Output
Pre-amplifier output for driving external power amplifiers, sub-
woofers or signal processors.
Loudspeaker Terminals
One set of Loudspeaker output terminals.
Headphone Output
A stereo 6.3mm (1/4") jack is provided on the front panel for
connecting Headphones.
When Headphones are connected the audio to the loudspeakers
terminals will be cut off.
Bluetooth Connection
Select BT source on the 6000A, on your mobile device search for
'Audiolab 6000A BT' and connect.
Connections
Operation Warranty Coverage Specifications
Once paired the front panel SOURCE indicator will be turned on. If you switch to another
input on the 6000A your mobile device will be disconnected after 60 sec. To reconnect,
select BT on the 6000A and it will connect to the last paired device, or select 'Audiolab
6000A BT' on your mobile device in the Bluetooth menu and it will reconnect.
12V Trigger Connections
The 6000A features two 12V Trigger connections, one output and one input. Use
the output to control other products (ie. Audiolab amplifiers or 3rd party compatible
equipment). Use the input when the 6000A is to be controlled (ie. by Audiolab
6000CDT, or 3rd party compatible equipment).
The Trigger connections are made using 3.5mm to 3.5mm jack interconnects (not
incl.).
Mains Input
Before connecting the 6000A to the mains supply make sure all other
connections to your system have been properly and securely made.
Make sure the ON/OFF switch on the rear of the unit is switched off.
Now connect the supplied mains cable to the AC supply outlet.
Page 5
OUT