Audiolab 7000N Play Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Audiolab 7000N Play. Audiolab 7000N Play 18 pagina's.

6: Connections

USB Update

Any oﬃcial Audiolab update will be provided by download from

audiolab.co.uk

Please read and follow any instructions provided with any such

download.

POWER OFF the 7000CDT unit. Insert the USB storage device, onto

which the USB update ﬁles have been loaded. Press the 'STANDBY'

button on the front panel then simultaneously POWER ON, your

7000CDT will upgrade automatically. Wait for the device display to

conﬁrm that the update is completed. Then, unplug the USB drive

and restart the 7000CDT. The unit is now ready to use.

12V Trigger Connection

The 7000CDT features two 12V trigger connections on the rear

panel. One is input from your ampliﬁer, and the other is a link that

can be used as an output to connect to other products such as the

wider 7000 series models. For the Audiolab 7000 series, this will be a

3.5mm to 3.5mm interconnect.

System Operations Playing Operations

Coaxial and Optical Output

The 7000CDT oﬀers one Coaxial and one Optical SPDIF digital

output. Connect a suitable Digital Coaxial (fully screened)

interconnect or Optical cable from the appropriate SPDIF

output of the 7000CDT to the input of a DAC or digital input on

your chosen ampliﬁer or preampliﬁer.

Mains Input

12V

TRIG

Before connecting the AC power cord to the 7000CDT, please

make sure the Power Switch is in the OFF position. Switch it to

the ON position after connecting the unit to the AC mains.

LINK

Page 8

DIGITAL

OPT

COAX

OUTPUT

AC 220-240V～50/60Hz 22W

FUSE T630mA 250V