Brainworx Fuchs Overdrive Supreme Plugin handleiding - Pagina 4
Blader online of download pdf Plugin handleiding voor {categorie_naam} Brainworx Fuchs Overdrive Supreme. Brainworx Fuchs Overdrive Supreme 10 pagina's.
Pagina afdrukkenT h e A m p S e c t i o n
TONE STACK:
GAIN:
Continuous knob, 1 to 10. The gain control sets the input gain for the primary clean
preamplifier. The clean channel acts as a preamplifier alone, during clean (non-overdrive)
operation. When the amplifier is in overdrive mode, the clean channel functions as a
preamp to the overdrive stage. All controls on the primary channel remain operational
during overdrive, allowing the overdrive tone to be controlled.
BRITE:
On/off switch. The Brite switch operates on the gain control and is active over about
half of the input gain control range. From '0' to about midway, it provides a boost to highs,
and the effect of the switch decreases beyond the halfway point on the gain control's
rotation.
DEEP:
On/off switch. The Deep switch shifts the overall tonality of the amplifier, slightly
increasing the low frequencies. This is often useful for single-coil guitars, which sometimes
need a low-frequency boost.
TONE:
Discrete 2 steps: "Rock" and "Jazz." The Rock/Jazz switch alters the operation of
the tone controls. The Rock position gives the highest gain, as well as a more aggressive
rock-type equalization. In the Jazz setting, tone is a more neutral/smoother tone. All tone
controls work in both modes, however their range and depth of operation is changed.
Fuchs Overdrive Supreme
|
HIGH:
Continuous knob, 1 to 10. The High control serves two functions:
•
Knob In position and LED OFF: Adjust high frequency spectrum.
•
Knob Out Position and LED ON: Engage the mid-boost. This shifts the range of the
high control downward, to include more midrange. All tone controls still operate,
however the tone will be fatter.
•
Note: You can double click the knob or click on the LED
MID BOOST:
On/off switch. Engage mid boost
MID:
Continuous knob, 1 to 10. The Mid control serves two functions:
•
Knob IN position and LED OFF: Adjusts mid frequencies.
•
Knob OUT position and LED ON: Engages the gain boost. This bypasses all tone
controls and allows greater overdrive and gain, on both clean and overdrive modes.
This can also fatten sound for single coil pickups.
•
Note: You can double click the knob or click on the LED
GAIN BOOST:
On/off switch. Engage gain boost
LOW:
Continuous knob, 1 to 10. This control adjusts the low frequency spectrum.
4