Casio Casiotone MT-140 Bedieningshandleiding - Pagina 2

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Casio Casiotone MT-140. Casio Casiotone MT-140 8 pagina's.

Pagina afdrukken

(DC Power )

° Dry batteries

Battery replacement:

@) Open the battery compartment cover on the bottom of the unit and

take out used batteries.

(2) Load new batteries taking care that polarity is correct.

* It is advisable to replace all six batteries at the same time for longer battery life.

* Standard battery life is approximately 3 hours.

¢ Car battery

With the car battery adaptor (CA-5, optional), DC power is supplied

from a car battery through the cigarette lighter socket.

supply.

AC adaptor AD-5 Sij

AC outlet

AC adaptor jack

—f BEX

nine

Cigarette lighter

socket

Car battery adaptor CA-5

* Auto power off function

2. Loading batteries with polarities reversed.

@) Turn the power switch ON.

(2) Adjust the volume level.

(3) Select one of 20 preset tones (see "PRESET TONES") or one of 210

Tone Bank sounds (see "TONE BANK SOUND COMBINATIONS").

(4) Now, start playing.

PRESET TONES

¢ To select a preset tone

@) Specify either the upper or lower row of preset tones by pressing

the tone select button, The upper or lower select indicator lights

to show the active row.

(2) Press one of the tone selectors to choose a preset tone.

* "PIANO" tone is automatically selected when power is turned ON.

¢ To select percussion sounds

When PERCUSSION sound is selected by the tone selector, the key-

board keys can be used to play a total of 42 different built-in per-

cussion sounds. These sounds are assigned to respective keys as

shown below;

0006

@ bass drum 1/2

@ gong 1/2

snare drum 1/2

@ tom 1/2/3/4/mixed

@® synth. tom 1/2/3

rim shot

@® cow bell 1/2

@ closed hihat 1/2

@ triangle open/mute

@ timbales; high mute/high/low/

@ crash cymbal 1/2/3/mixed

mixed

synth. cymbal 1/2/3

@ computer game sound 1/2/3

ride cymbal 1/2

@ agogo high/low

¢ Dual bass sounds

When BASS sound is selected by pressing the "BASS" button (one

of the tone selector), two different bass tones can be played on the

keyboard at the same time.

The WOOD

BASS tone sounds on the lower half of the keyboard

(C2—B3), while the SLAP BASS tone sounds on the upper half

(C4—C6).

TONE BANK SOUND COMBINATIONS

* To select Tone Bank Sound Combinations

@) Select any of the 20 preset tones. When selecting Tone Bank sounds,

the tone initially selected is used as a base, or "Primary" sound.

* When the Primary sound is selected, the keyboard features 10-note polyphony.

(2) Press the Tone Bank button.

This activates the Tone Bank function, allowing you to choose a

Secondary sound to integrate with the Primary sound you just

selected.

* After the Tone Bank button is pressed, the keyboard changes to 5-note

polyphony.

(3) Select any other of the 20 preset tones. The characteristics of this

"Secondary" sound is automatically integrated with those of the

"Primary" sound already selected.

The secondary sound can be changed at any time, as long as the

Tone Bank function is selected. Simply select a different preset

tone—the primary sound remains the same.

¢ To select a different primary sound

The primary sound can be changed by first turning the Tone Bank

function OFF (press Tone Bank button so that indicator goes out),

selecting any other preset tone, and finally turning the Tone Bank

function back ON. The secondary tone remains the same in this case.