AUDIOLINE AL502 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AUDIOLINE AL502. AUDIOLINE AL502 17 pagina's. Wall mountable telephone
Ook voor AUDIOLINE AL502: Gebruikershandleiding (17 pagina's)

Pagina afdrukken

English

Connection

1. Connect the telephone cord to the socket marked

telephone, and then to the telephone network socket.

2. A click will be heard when the modular plug is correctly in place.

3. Lift the handset and listen for the dial tone. Your telephone is now

operational.

Wall mounting

The telephone can be wall mounted. This is done with two screws positioned

vertically at a distance of 100 mm; the screws should then fit into the two

'keyholes' at the back of the telephone. This product can also be mounted

directly onto the standard wall plate (Australia only).

Mute button

During a call the microphone can be disconnected for as long as the

is pressed.

Redial button

If the number dialled is engaged or if the last number dialled is to be redialled,

lift the receiver and press the redial button

Recall

Press the recall button

when connected to a PBX (TBR only).

Access to additional network services can be gained by using the recall button

and

keys. Contact your network operator for more information.

Volume control

The volume may be adjusted using the switch located on the handset.

Ringer

The ringer can be set to low or high using the switch

the telephone.

Operation

followed by the extension number to transfer calls

underneath the

button

underneath