Audiomatica CLIO FW-02 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Audiomatica CLIO FW-02. Audiomatica CLIO FW-02 15 pagina's.

3 CLIO INSTALLATION

3.1 MINIMUM PC CONFIGURATION

The CLIO FW-02 USB interface running the CLIO 12 software can be installed in any

personal computer with the following minimum system requirements:

– Processor: single-core @ 2GHz clock or dual-core (suggested)

– One free USB 2.0 port

– 1024x786 video adapter

– Microsoft Windows XP, Vista, 7, 8 or 10

BE SURE TO HAVE ADMINISTRATIVE RIGHTS WHEN INSTALLING!

3.2 FW-02 DRIVERS INSTALLATION

To install the FW-02 drivers in your computer you should follow the instructions

presented below:

1) Connect the FW-02 to a free USB 2.0 port on your PC and power it with its 12V

supply. You should hear the classical sound of plug and play devices.

NOTE: ClioXP is the nickname of the FW-02 device seen by Windows.

2) After the initial automatic driver detection only one device should be found amd

properly installed by Windows, the USB Composite Device; two more devices,

named ClioXP will need to be installed manually. Open Device Manager (type

devmgmt.msc

Manager); you should find this situation:

3 CLIO INSTALLATION

from

Run

prompt

click

Control

Panel>System>Device