DANLERS CEVO RFD250W Installatie-opmerkingen

Blader online of download pdf Installatie-opmerkingen voor {categorie_naam} DANLERS CEVO RFD250W. DANLERS CEVO RFD250W 2 pagina's. Radio receiver dimmers

Pagina afdrukken
Preprogrammed options
DANLERS radio receiver dimmers can be factory programmed, with the
assigned senders, to perform more complex functions, such as:
• Minimum and maximum dimming limit
• Variable manual dimming speed
• Automatic gradual dim On (max 4 minutes)
• Automatic gradual dim Off (max 4 minutes)
• Dim to a preset value over a preset time (max 4 minutes)
Troubleshooting
Radio receiver dimmer does not respond to sender:
• Ensure the sender is correctly assigned to the radio receiver.
• The sender is too far away or RF absorbed by building or trees.
Move sender closer to radio receiver or consider using a repeater.
• The sender battery is flat (average life approx 5 years).
Change battery making reference to sender installation notes.
Load and receiver LED flash twice each time the sender is pressed:
• Ensure the radio receiver dimmer is not in programming mode.
Radio receiver stops working:
• The load or in-rush current is too large and has damaged receiver.
Ensure mains halogen lamps include a thermal safety fuse
Precautions and Warranty
This product conforms to BS EN 60669-2-1.
Please ensure the most recent edition of the appropriate local wiring regulations are observed
and suitable protection is provided e.g. 6 amps over current, 1kV over voltage. Please ensure
that this device is disconnected from the supply if an insulation test is made.
This product is covered by a warranty which extends to 5 years from the date of manufacture.
Products available from DANLERS
• PIR occupancy switches • Daylight linked dimmers • Manual high frequency dimmers
• Photocells • Radio remote controls • Time lag switches • Outdoor security switches
• Dimmers • Heating, ventilation and air-conditioning controls • Bespoke / O.E.M. products
Please call for more information or a free catalogue, or visit our website,
DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.
Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388
Web: www.danlers.co.uk
Company Registered Number 2570169 VAT Registration Number 543 5491 38
28/01/11
DANLERS radio receiver dimmers can be user programmed to respond
to any DANLERS radio frequency (RF) manual (or slave) sender. With
a manual sender the radio receiver dimmer will switch the load on full
when a programmed DANLERS RF sender up button is pressed quickly
and dim it up with a sustained up press. A quick down press will switch
the load off and a sustained down press will dim the load down.
With a slave sender, the radio receiver dimmer will match the state of
the device plugged into the slave sender - fully on or off.
The dimming technology used is 'Trailing Edge', ideal for most low
voltage transformers and direct mains dimmable CFL & LED lamps.
WACE RFD250W Wall or Ceiling mounted onto a 16mm back box
CEFL RFD250W
.
CEVO RFD250W Ceiling Void, fits through cutout ø60mm
EXRF D250W
PORF D250W
Up to 250W of resistive load. Mains halogen lamps must incorporate
an integral thermal safety fuse.
WACE, EXRF, DIN Via incorporated terminal block.
CEFL, CEVO
PORF
INS961 RFD250W
Radio receiver dimmers
WACE RFD250W
CEFL RFD250W
EXRF D250W
PORF D250W
Mounting examples
Ceiling Flush (cutout ø64mm) or in ceiling void
External unit - rated to IP65
Portable unit for plugging into 3-pin socket
Loading
Connection method
Via incorporated 2 metre flex.
Plugs into a square 3-pin socket.
Installation notes
CEVO RFD250W