Danley SBH Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Danley SBH. Danley SBH 8 pagina's.

Section 1

1.1

Unpacking

For most of the Danley Sound Labs products we recommend that it be unpacked by two or more people. Refer to the spec sheet

for product weight. Remove tape and open top flaps. Lay the box on its side and slide the loudspeaker out. Remove the packaging

wrap.

1.2

Inspection

Check to make sure the product is not missing hardware of any kind. If any brackets or additional accessory hardware is missing,

please don't hesitate to contact Danley Sound Labs.

1.3

Shipping Damage

If your Loudspeaker appears to have been damaged in shipping, please take clear photographs and contact the carrier immediately.

Section 2

2.1

THE SYNERGY HORN

The Synergy Horn successfully couples the radiation from multiple drivers into a single horn to yield the effective performance

of a single horn/driver system with high sensitivity excellent directivity control and a wide frequency response.

Section 3

3.1

What Size Amplifier to Use

Selecting the right amplifier for your loudspeaker depends on a variety of factors and uses. The owner is ultimately responsible

for choosing the best amplifier or amplifiers for the application. We recommend choosing an amp that is rated between the

continuous and program ratings. Please note "Continuous" does not mean "forever"! Most loudspeaker manufactures, including

Danley Sound Labs, subscribe to the AES standards for loudspeaker power ratings.

3.2

Connecting to the Synergy Horn

Your Danley loudspeaker has two NL4 ("speak-on") connectors located on a panel on the rear of the box. With the exception of

the SH96HO, SH46 and SM80M, all SM and SH series loudspeakers are wired as passive. The NL4 connectors are wired

parallel.

Pinout: Passive

Positive Full Range

1 -

Negative Full Range

Pass Through

2 -

Pass Through

Pinout: Bi-amp

Positive LF

1 -

Negative LF

Positive Mid/High

2 -

Negative Mid/High

Page | 4

DANLEY OWNER'S MANUAL

Your New Loudspeaker

Understanding the Difference

Initial Set Up

Wiring View of an NL4 Connector