Conservator GRM072AB Installatie- en bedieningshandleiding - Pagina 5

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Conservator GRM072AB. Conservator GRM072AB 17 pagina's.

2. INSTALLTION

2.1 Location

When selec�ng a posi�on for your unit you should make sure the floor is flat and ﬁrm, and the

room is well ven�lated. Avoid loca�ng your unit near a heat source, e.g. cooker, boiler or radiator.

Also avoid direct sunlight as it may increase the electrical consump�on. Extreme cold ambient

temperatures may also cause the unit not to perform properly. This unit is not designed for use in

a garage or outdoor installa�on. Do not drape the unit with any covering.

When installing the unit, ensure that 10 cm of free space is le� at both sides, 10 cm at the rear

and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and

improve the efﬁciency of the cooling process.

2.2 Reversing the Door Swing (optional)

Tools Required:

Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner

1) Take oﬀ top hinge cover, top hinge ,the sleeve pipe of freezer door and hole cap on the other side.