audiophony Combo 60 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} audiophony Combo 60. audiophony Combo 60 12 pagina's.
Pagina afdrukkenENGLISH
4.3 - Functions and additional information
PRIORITY connectors
Allow you to connect a dry contact switch.
When these two borns are connected, all the other
sources (AUX and CD inputs) will be dimmed. The
default parameter is -30dB.
MUSIC ON HOLD connectors
Allow you to connect an amplifier to your
telephone switchboard in order to send a musical
signal during the music on hold.
Your switchboard must feature this function. The
wiring must be operated by a qualified technician.
Wiring: the signal must be sent to pins C and H.
TELE PAGING connectors
The TEL IN 1-3 connectors allow you to connect a
public-adress system to your amplifier. Any
incoming signal will be a priority. The settings will
go back to normal after the announcement.
Wiring: The PA system must be connected to pins
1 and 3.
Pin 1 is the negative (-Ve) Pin 2 is the mass, Pin
3 is the positive (+Ve) while Pin 4 is used for the
Mute.
Any signal detected via Pin 4 is a priority signal.
4.4 - Output terminal
The output terminal is located at the rear and can be used to plug Banana connectors or bare wires. The
black socket is the com while the red sockets are the positive (the choice depends on the voltage).
Please only use loudspeakers whose transformers have a total power lower than the power of the amplifier.
If using a loudspeaker system between 4 and 16 Ohms, use the corresponding 4-16 Ohms output. In this
case, the total power of the speakers must be closed to the total power of the amplifier (+/-10%).
The impedance must not be lower than 4 Ohms or high than 16 Ohms in order to prevent any damage to
the amplifier.
Page 8
COMBO60 - Mixer/amplifier with tuner and usb player
Connecting your USB key
Connect your USB key before turning on the
COMBO60. The default mp3 mode is "full loop",
the unit will read all the tracks contained in a loop.
Only use compatible formats: the key or HDD must
be FAT-formatted, with a maximum of 500 Gb.
Moreover, the player can read files up to 48 kHz.
The sampling rate is limited to 320 kbs.
We strongly advise against using devices
containing other types of files (images, videos,
etc).
USB folder tree
The USB key player can read up to 99 folders max.
Each folder can contain up to 999 files. Beyond
these limits, the player will not detect tracks.
Moreover the tree folder cannot include more than
8 layers, including the root directory.